-
hi, has someone checked if tasmota run´s on this well designed EU dual outlet socket?
DIGOO DG-SP202 / DIGOO NX-SP202
3720W Dual Outlet Smart Socket ( banggood id /item no: 1375323 )
Acco…
-
hello
do you also have a raspberry pi version
of the
homegw digoo temp hygro 433 mhz sensor
treid to compile your digoo.cpp with no luck yet
luberth
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
If the Mqtt logging level is set to "2 Info" from the default "0 None" the device will reboot every few minutes …
-
Hi,
I have a CO sensor and on Sonoff RF Bridge with RfRaw AAA655 receive a codes when I push the test button:
`12:25:07 CMD: Rfraw AAA655 12:25:07 MQT: stat/sonoff_rf/RESULT = {"RfRaw":"ON"} 12:25…
-
Hello
could someone explain how to use this with domoticz
i have 4 Digoo DG-R8B 433Mhz temp humid sensors
fridge freezer living outdoor
what i do now is in main.cpp i write the sensors to a html…
-
Can motioneyeos support adding third party camera's as 'remote cameras'? Example:
https://www.banggood.com/NEO-COOLCAM-NIP-55-HD-720P-Mini-WiFi-IP-Camera-Wireless-P2P-Baby-Monitor-Network-CCTV-Secu…
-
Is it possible to add/decode TFA or Oregon Scientific Tem/hum Sensor support?
-
hey folks.
the android app "tinyCam Monitor" is able to show a stream of an "Digoo DG-UFC" cam, which do not have onvif protocol.
The following parameters are exported by tinyCam Monitor.
But i…
-
### Latest firmware used?
Version 0x03
### Information
Not receiving any data after upgrade to newest firmware. Must downgrade it. What is the problem?
### Sniffed data
No data.
-
I wonder if **motion tracking is also available** with this cameras and the custom firmware from this repo **?**
Escam G02, Sannce I21AG, MixSight HX-I2110T2, WanScam HW0036, Digoo BB-M2, etc.
!…