-
I'm attempting to run your code on Processing 3.3.7, I'm using the latest version of the libraries you included that I could find but I'm not able to get passed this error. The full error text is:
`…
-
I took screenshots of the errors I'm getting in Arduino. The code is below the screenshots (sorry if the formatting is bad. I'm new to this site and the code is pretty long). The error comes at the li…
-
APA Electronic has a new [13-bit version of the APA-102](http://neon-world.com/en/product_detail.php?cid=59&id=114) LEDs which have a lower refresh rate (approximately 700MHz) but smoother colours.
A…
-
It seems to be impossible to drive dotstar LEDs using spidev1.1 on raspberry pi. Maybe because [dma seems not to be supported by raspberry pi on spi1](https://www.raspberrypi.org/forums/viewtopic.php?…
-
Unify the CircuitPython quick starts for mirroring across all the board guides!
For CircuitPython Expectations, see issue #583
**QUICK START PAGES:**
- [x] CircuitPython Built-Ins
- [x] C…
-
In order to get the correct color when calling `setPixelColor()`, I had to change the initialization to:
`Adafruit_DotStar leds = Adafruit_DotStar(TOTAL_LED, PIN_LED_DATA, PIN_LED_CLOCK, DOTSTAR_BGR)…
-
Optionally add a level shifter according to the [Adafruit Dotstar Painter](https://learn.adafruit.com/dotstar-pi-painter?view=all) to the shield.
Connect the **!OE** pins to **!CE1** instead to GND.
…
-
The C file 'dotstar.c' uses 0xFFFFFFFF for the footer value, but using that value results in the numLEDs + 1 LED to be illuminated bright white. According to the blog linked below, the footer is used …
-
Hello
First off, thank you very much for the libraries. Even thou I am having an issue with the mirror scrolling, I can tell these libraries are exactly what I need using the FastLED framework.
…
-
If the input to set_item is of type list then it gets ignored in this driver. If that is intentional, then it needs to be clearly documented. In contrast, the dotstar driver will accept a tuple or a …