-
![20230101_14-24-40](https://user-images.githubusercontent.com/45470571/210172429-16abca1e-ae2d-4eba-9a22-0d533ef18d0b.gif)
```
[...]
for repeater in data["relais"]:
try:
if repeate…
-
`core restart now` doesn't always work. There is a CLI prompt but no response to any commands. This seems to happen mostly on the ASL3 server after it runs for a while. This server is the only one wit…
-
It seems like there is a CLI command that is used internally in app_rpt in a rather hacky way.
When "rpt fun" is used, for each digit that gets sent, we get a "no such command", so possibly that is…
-
Hello. Now I use mmdvm in fm mode in conjunction with SVXlink through USRP. But perhaps it is possible to use RAW data via UDP? Is it possible to do this?
-
Building a new server with 15 or so mostly voter nodes with a couple of dahdi nodes. The CPU usage shows over 700% but drops to less than 1% when unloading the app_rpt module. Also shows `Exceptionall…
-
I will start by stating that I discovered the issue in svxlink v1.7.0 that ships with Debian Bullseye. I understand that this is old, but I believe that the problem persists in the current code base.
…
-
Reported in #34 that IAX-based connections that are ASL nodes coming in as a callsign and no modifier (like phone panel users). Support this.
-
#### Brief summary of issue / Description of requested feature:
If you print a line with echoLink and have timestamps turned on, and print it on a line that doesn't have a timestamp, then it prints t…
-
Do we have time to add Allstar and Echolink information to our repeater list? We do have a big following outside the area, so it might be nice to document the ID's needed to connect to the repeaters …
-
I am getting "could not parse /var/www/html/allmon3/api/allmon3.ini".
Do I need to place allmon3.ini in var/www/html/allmon3/api/?
per instruction I placed allmon3.ini in /usr/local/etc/
The …