-
Not a major issue as you've said you've got several others on the way for testing, but the link to the motor you used is now out of stock: [AliExpress](https://www.aliexpress.com/item/1005001384349991…
-
Great job! Thank you! I have only one "little" dream: Is it possible to switch power on the BT module only when I switch to the CD changer in HU? BT turned off when I listen to FM radio.
-
Hello Team foxBMS-2,
I wanted to inform you that we have successfully manufactured the master card and programmed the PMIC with the OTP, thanks to the efforts of the team.
However, during testin…
-
I've posted this before, but I'll try again. My code is pretty simple. I check for SMS messages and then reply back using Hologram's network. I'm using the latest MKRGSM library 1.3.1. I also have a …
-
HI
Is there some support for write protection of flash chips,
usually I need to protect bootloader in first 2MB of flash
from accidental overwriting. My chips of interest are some
ISSI and Winbo…
-
Hi, after i set up the adxl345 to the Rpi and installed all the
dependency, when i query the probe, i got this message:
Send: ACCELEROMETER_QUERY
Recv: !! Invalid adxl345 id (got 8f vs e5)
…
-
-
hi , i have ESP32 esp-wroom32 with yellow pins:
https://www.aliexpress.com/item/32845423155.html?spm=a2g0s.9042311.0.0.27424c4dYMzqRH
i upload succesfull the bin file of last release for ESP32
bu…
-
**Is your feature request related to a problem? Please describe.**
There are some places without wifi, but that may well have wired ethernet (e.g. basements in multi-tenant houses).
And there are ev…
-
src\boards\include\boards\waveshare_rp2040_zero.h sets PICO_FLASH_SPI_CLKDIV to 2.
However, according to the board schematics (https://www.waveshare.com/w/upload/4/4c/RP2040_Zero.pdf), this board use…