-
When converting an mpr file to an mpt file, there is a lot of header information, e.g.:
example MPT file header
```text
EC-Lab ASCII FILE
Nb header lines : 191
Galv…
-
Hello, I'm trying to convert myself to using `simple-ioc`, from `jaredhanson/electrolyte`, a functionality that seems simple but quite powerful is natural namespacing via strings.
Example follows:
`…
-
When changing paragraph to a list after pasting in with indent fails with a crash.
Lexical version: the version on the playground (Latest on https://playground.lexical.dev/)
Steps To Reproduce
…
-
# Prerequisites
- [x] I have searched [open](https://github.com/ci-fhir-r4/Issues/issues) and [closed](https://github.com/ci-fhir-r4/Issues/issues?utf8=%E2%9C%93&q=is%3Aissue+is%3Aclosed) issues …
-
The markings for the generic and the 10mm LEDs in Fritzing differ. They don't have a datasheet attached that could be followed.
Therefore, I think they should at least use the same marking system.
A…
-
There's no github for the V4 PCB so I'm filing the issue here. The regulator on the V4, the AMS1117, is attached to a ceramic bulk cap directly, but it's not rated for ceramic stability. I haven't not…
-
All passives are 0805 components. This is not a good idea for high power design. Many caps are bypass or output caps. Some resistor need to withstand high voltages. These will have to replaced to larg…
-
Hi!
I'm more of a novice, so excuse my mistakes.
I wanted to use a vibration switch (1) to turn on the Arduino, but it didn't close the button circuit long enough for the Arduino to boot and rai…
-
It is not straight forward how to deal with dummy cells.
The simplest dummy cell typically used consists of resistor R_ct (charge transfer) in parallel with a capacitor C_dl (double layer) which are…
-
Hello,
I have tested this lib in other flash's that works, but now with W25Q80BL seams that it don't write.
I use the ATSAMD51 (M4) by SPI
WP is connected to VCC 3.3v
The debug:
```
Initia…