-
since a few weeks I have a problem with the evohome binding.
Before, when I sended setpoint.sendCommand(0) to the evohome the permanent override got cancelled and thus evohome started to follow the…
-
Hi,
can you add a description on how I can integrate evoGateway with the MQTT integration in Home Assistant?
I already use the MQTT integration for Zigbee2MQTT and Zwave-JS UI.
Thanx.
-
**Describe Your Problem:**
I have noticed that homebridge's cpu consumption is slowly but surely growing over time:
![image](https://user-images.githubusercontent.com/10730249/93140502-dbdda800-f6…
-
Is there a way to replace the room-temperature (return air temperature) with an external EvoHome sensor available in HA value to steer the units settings.
In my experience there is rather a big diffe…
-
hello,
I'm using honeywell evohome and I receive strange temperatures with 30C9 messages. I only receive distinct temperatures 10.28 , 12.85 , 15.42, 17.99 and 20.56. In hex those temperatures are …
-
> -- EDIT BEGINS --
> The solution for v0.20.x and v0.21.x is to use: `ramses_rf.send_command` instead.
> -- EDIT ENDS --
Hi,
Have
- Nuaire Drimaster PIV
- Nuaire DRI-ECO-4S (4-way switch)…
-
### Issue Guidelines
In the current version of domoticz, both Homebridge and Homekit do not recognise a thermostat anymore. I think this is caused by a change in dummy.cpp. To be more precise: in l…
-
### The problem
I have set up a number of Automations to allow a user to change the System Mode with Boolean Triggers.
When using Auto no Period / Duration is required, for AutoWithEco with / with…
-
[Mike Henderson](https://community.home-assistant.io/u/Mike_H)
[HA Community post](https://community.home-assistant.io/t/honeywell-ch-dhw-via-rf-evohome-sundial-hometronics-chronotherm/151584/3365?u=…
-
### The problem
I tried to link a statistics graph card to climate sensor through "Honeywell Total Connect Comfort (Europe)" integration. But the sensor is not listed. Found this reference to this si…