-
## The problem
After HA Core update to 0.115 I have just lost my MCP23017 Expander for both: sensor and switch.
Example of config (the same setting was working perfect on previous version)
…
-
反馈bug/问题模板,提建议请删除
## 1.关于你要提交的问题
Q:是否搜索了issue (使用 "x" 选择)
* [ ] 没有类似的issue
## 2. 详细叙述
### (1) 具体问题
所有组件都顺利编译完成,但在安装阶段出现了问题,换用其它的编译环境也出现相同的错误
### (2) 路由器型号和固件版本
编译环境 Ubuntu 20.04 …
-
Hi everyone,
So I've forked @thinkyhead 32-bit branch and started to work on an ESP32 implementation. The code isn't functional yet, I got the very basic code working to get it compiled + uploaded …
-
Thank you for this library it has made my introduction to ESP and Arduino a lot easier.
I have found myself in need of more inputs, I was surprised at how many inputs cant be used on the ESP boards…
-
Any plans to support stepper motors, especially driver mode?
I have an Arduino johnny-five project I'm looking to port to a Raspberry PI.
-
**I saw your comment about releasing 8.8.0 for the multichannel outputs, and I upgraded my test system from 8.7.2 to 8.8.0, and then as soon as it finished I noticed that you'd released 8.8.1 so I upg…
-
While attempting to get my grbl build to work with a custom built setup, i kept having trouble with startup and serial. It seems the issue was pin 12 being used.
Esp32 seems to have reserved this …
-
I tried to update Hass.io. However, after clicking update and waiting some time there was still version 0.104.3. Several times. When I turned off MCP23017 integration the update was successful. When…
-
There's now a HAL published on crates.io: [`embedded-hal`][] ([Introduction blog post][brave-new-io]). :tada:
[`embedded-hal`]: https://docs.rs/embedded-hal/0.1.0/embedded_hal/
[brave-new-io]: htt…
-
Hello, I just installed this for the first time and made my own MIDI adapter for the GPIO pins using your schematic. I hooked up an OLED display and it works properly. Munt is missing some note-off'…