-
## SMEs
**BMC**: @lkammath
**PHYP**: Adam Stallman
**RAS**: George Ahrens
## Research
### Summary
The goal of this story is to finalize the fault and service indicators in the HW status and …
-
Most of the ps information specific to 2U/4U will be contained in entity manager config files so the fw can be data-driven. PS present detect gpio definition currently resides in templated config file…
-
Hello.
We have two storage **HP MSA P2000 G3** with expansion enclosures.
If we look at the web interface of storage controllers, we see that the storage systems are working normally.
But if we …
-
Using oXygen 23.1 (on macOS 11.3), when running an XSpec via Apply Transformation Scenario to test a Schematron with the `@queryBinding` set to `xslt3`, I get an error, stating:
> Fail: This implem…
-
When PEL code decides to make something as faulted, it will:
- Set State.Decorator.OperationalStatus property:Functional to false
- Set the `critical` association from `motherboard/chassis` to I…
-
Currently, a fan's `Functional` property is updated to reflect its current functional state once it has been deemed to be nonfunctional (according to the number of seconds or counts being out-of-spec)…
-
Individual PLDM State Sets previously implemented (eg UPS and EPOWs), full support for PHYP interface with this story.
Confirm Platform Event message sent when ps or fan removed or added:
When a p…
-
Today, we have these Inventory D-Bus objects in Wither spoon for example:
...............
├─/xyz/openbmc_project/inventory/system/chassis/motherboard/fan1
├─/xyz/openbmc_p…
-
The BMC needs to collect VPD for all FRUs that it has direct access to, at BMC standby. On Rainier, this includes the BMC card itself, the system backplane, the processor FRUs (for callout puposes), p…
-
The original fan tach feedback wiring used the outlet rotor to determine when a requested target speed had been reached. The updated fan hardware will use the inlet rotor in determining this, so an ov…