-
For reference; this question was already discussed a little previously in -> https://github.com/zigpy/zigpy/discussions/727 as well as here -> https://github.com/zha-ng/EZSP-Firmware/issues/11
Avai…
-
First of all thanks for sharing this.
Sorry, if this sounds like a stupid Q as I am new to SDR. Why is the block diagram so complicated and doesn't use any direct filter like LPF etc? Is this becaus…
-
### Description of defect
Were trying to reduce sleep current like the SX126X driver by using the following
"stm32wl-lora-driver.sleep-mode": 1
However it doesn't even compile, fixing t…
-
Hi,
trying to decode the attached wav file I encountered the following segmentation fault.
It happens on Linux and macOS.
Compiling with debug `CMAKE_BUILD_TYPE=Debug` the segmentation doesn't happ…
-
Hi Electronic Cats (@Liars126) !
I recently came across your CatSniffer, which is a pretty handy device!
I am currently doing some research on LoRa compatible MCUs and officially it seems as tho…
-
**EDIT:** **Turns out that this sensor is a V2 and due to that, has actually nothing to do with the Maverick, so it will likely require a new decoder. So the first few posts contain some erroneous ass…
-
I'm trying to understand how ANT+ works, so I'm using Pluto SDR centered at 2.466Ghz, and I can see the rapid bursts of data, together with a lot of 2.4GHz noise. To minimize interference, I'm using j…
-
Hello Jan!
sorry for dumb question, but I carefully read all corresponded issues regarding CubeCell. FSK modem works great at SX1276+ESP32
But my problem is CubeCell at FSK mode. Can not pass ini…
-
**Description of the issue**
I built Satdump on Debian 11, and it crashes every time it's started.
**Version (Eg, 1.0.0, CI Build #171)**
v1.0.4-61b8a1d4
**Logs after the cras (satdump.logs)**…
-
### CircuitPython version
```python
CircuitPython 7.2.0 on Raspberry Pi Pico RP2040
```
### Code/REPL
Pull directly from the RFM69HCW tutorial on your website. Code adapted to use the Pico…