-
Hi I bought 2 of these devices cheap as chips off ebay. V2.3 with no RX/TX pads and no IR connected.
I flashed one of them with the latest tasmota build using esptool (via raspi with serialUSB), mak…
-
**Describe the bug**
I am trying to install Tasmota on an H801 light controller. Flashing the latest sonoff.bin resulted in a slow reboot loop, with no output. After struggling to get it to change …
-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
pip, python2.7
**ESP (ESP32/ESP8266, Board/Sonoff):**
H801 - ESP8266
**Affected component:**
https://esphome.io/com…
-
`Node.js
v10.20.1 (Empfohlene Version v12.16.3)
NPM
6.14.4`
`scriptengine v4.6.4
`
blockly scripts with timers.
After updating many scripts do not show the stop timeout / timeout combinat…
-
### PROBLEM DESCRIPTION
When I tell Alexa to set the lights to WHITE the lights go out
And when i tell Alexa to set the lights to BLACK the lights go white
### REQUESTED INFORMATION
_Make s…
-
I have a built-in H801 controller as a Hue Bridge multi device.
My RGB lights only have 3 channels (R,G,B). They don't have a W1 or W2 channel.
When I tell Alexa to set the lights to WHITE the lig…
-
Hi guys
Simple one here, maybe I just need enlightening if this is not new. I just received an H801 controller from AliExpress and with a suitably powerful supply and 5m of 12v RGB LED STRIP, I wen…
-
### PROBLEM DESCRIPTION
When mains power is applied, `FADE 1` and `SPEED 15` settings are ignored and instead turns on at dimmer level brightness immediately.
### REQUESTED INFORMATION
- ✅ Read the…
-
Just tried to update Tasmota from 7.2.0 to 8.1.0.1 onto one of my SonOff Basic. Got the following error message:
++++++
Sonoff Basic Modul
Sonoff_Test_1
Upload fehlgeschlagen
Upload Buffer Verg…
-
### PROBLEM DESCRIPTION
In Tasmota the H801 controller flahes LEDS attached, briefly at full brilliance on powerup.
### REQUESTED INFORMATION
_Make sure your have performed every step and c…