-
Hi,
is it possible to specify that a line should be filled on parts when another entity has a certain value? I have my heating system's data hooked up with this card and I wold like to show when the …
-
Since the voltage is measured by resistor divider, it will be affected by the temperature drift of the resistor, and the heating effect of those 20Ω resistors is still very obvious. I decided to add a…
-
**Describe the feature you would like to have**
Hello, I would like to understand the difference between stating different uses in _typology.dbf_ and building mixed-uses usetypes in the databases via…
-
Hello all...
I'm trying to use esphome opentherm on my Daikin D2C boiler
I can see many parameter and randomly turn on and off boiler, but seems something is missing
With original Daikin thermostat…
-
Hi,
Now that I have a Homey PRO I'm connecting all possible KNX devices to my home app. Not everything is working as expected and some improvements are to be made :
1. DPT of type 14 is not wor…
-
Hey!
I'm currently trying to get full control over my Viessmann Vitodens 300-W B3HG using Home Assistant and the Vicare component by @oischinger.
Besides adding additional data points, I realise…
-
Hi,
thanks for that cool plugin!
I have following FR:
I calibrate my esteps always with detached extruder from the hotend (as it is recommended).
Ususally, the firmware has a temperature check…
-
I am using the channel two of the HmIP WSH2 to control an electric valve. The device is paired to the access point and is configured as “ Switches an output for e.g. boiler or pump depending on the he…
-
### Prerequisites
* [X] Model name of your Devices
Sonoff TRVZB
* [x] Output from Home Assistant Developer Tools state e.g.
```
hvac_modes:
- "off"
- auto
- heat
min_temp: 4
ma…
-
### The problem
There is a party mode which I can select in the HomeMaticIP App, but it's not recognized or selectable/configurable in Home Assistant. I provide a selection of the HomeMatic IP Conf…