-
Hello,
it might be a PEBKAC problem, but I stare at my work for quite some time and don't see the problem.
I installed 775137f273ed on an i.MX25 running Linux 5.15. It can operate the wifi stick…
-
```
What steps will reproduce the problem?
1. hostapd gui start with sudo
2.
3.
What is the expected output? What do you see instead?
il-81:~/Scaricati/WiFi_Hostapd_AP-0.9.5.2-01.05.2012_i386$ sudo
…
-
I have an issue where clients are struggling to connect to the a wilc3000 AP. I am running the latest git heads of both the driver and firmware. Please find attached a dmesg log, and hostapd configura…
-
Hi,
When I try to set on MT7921e a channel `> 100`, the interface initialization always fail.
For example:
```
# Channel 104, 80MHZ width:
Sat Jan 13 13:06:52 2024 daemon.notice wpa_supplicant[…
-
Using Kali (rolling)
Alfa AWUS036NH
Client would connect to SSID then immediately disconnect with error message:
hostapd handle_assoc_cb STA [MAC ADDRESS OR CLIENT] not found
Realized that the wlan…
-
The command brctl addif fail on client
```
brctl addif br0 wlan1
can't add wlan1 to bridge br0: Operation not supported
```
nmcli command also fail with timeout on client
```
nmcli con add…
-
@mayhem How do I disable the hostapd/dnsmasq bartendro wifi and just access the UI through the IP my router gives the Pi? Accessing the (pop up) interface through the bartendro wifi is very inconsiste…
gmuse updated
7 years ago
-
### Describe the bug
unable to upgrade from "xxxxxx-4" to "xxxx-6". Says in conflict with wpad *
### OpenWrt version
r23497-6637af95aa
### OpenWrt release
23.05.0
### OpenWrt target/subtarget
i…
-
Hi,
I have a mesh network between 2x Xiaomi Redmi Router AC2100.
What works:
* 802.11s VHT80 channel 36.
* VHT160 channel 36 AP mode only.
* 802.11s VHT160 channel 100 (but lot of packets los…
-
## ssh 接続
```
ssh pi@raspberrypi.local
```
## ラズパイ側のIPの固定
```
cat > /etc/dhcpcd.conf
sudo echo "static ip_address=192.168.20.1/24" >> /etc/dhcpcd.conf
```
```
sudo systemctl restart d…