-
### The problem
So I bought a DHTC12 sensor from Aliexpress.
Dutch link to seller page:
https://nl.aliexpress.com/item/1005007198030360.html?spm=a2g0o.order_list.order_list_main.53.31d479d2F6q9Ak…
-
Hello,
I'm trying to use 2 MCP in the same sketch, but meet no success. Both have different addresses and are working well alone (both connected to the same bus, but sketch is talking to only one a…
-
Board information:
(sysname='GPy', nodename='GPy', release='1.18.2.r7', version='v1.8.6-849-df9f237 on 2019-05-14', machine='GPy with ESP32')
I am actually using the G01 module on a custom board. …
-
Dear Bob
I am intending to add another magnetic sensor to the i2c-bus (hmc5883l) and use both magentic sensors, i.e. the hmc5883l as well as the HSCDTD008A to count impulses from 2 gas meters.
How …
-
### Description
This RFC attempts to capture a proposal to turn this upstream repository into a Zephyr module, to allow easier use for developer to leverage Blues Notecard APIs to develop their Zep…
-
OS: Fedora 40 (KDE)
Kernel: 6.8.5-301.fc40.x86_64 (64-bit)
lm-sensors: lm_sensors-3.6.0-18.fc40.src.rpm
Output from sensors-detect (note: secure boot is on)
```
# sensors-detect version 3.6.0…
-
I've followed the installation instructions.
My device is detect as "usb" when I type: `lsusb` in the command line:
```
Bus 001 Device 008: ID 1a86:5512 QinHeng Electronics CH341 in EPP/MEM/I2C mod…
-
I am working on a module that uses two cameras connected to the board. Both of these cameras run on video stream mode (though for the sake of this mini example I've let one run in capture mode and one…
-
Hello! I am running an Orin NX 16 in the ARK PAB Jetson Carrier. I built and flashed using the instructions from the main branch of this repo.
I followed your example and activated the "Camera ARK …
-
I am struggling to calibrate an Mpu 6050 specifcially it is a;
`Adafruit MPU-6050 6-DoF Accel and Gyro Sensor - STEMMA QT Qwiic`
which is connected to a Raspberry Pi 2.
When I try to call the…