-
Hey. I have a CNC setup using ESP32 & Raspberry PI. ESP32 is programmed with grblHAL software.
At the moment, I am manually controlling the spindle. The controller that I use:
Optidrive ODE-3-220…
-
**Issue by [dniklaus](https://github.com/dniklaus)**
_Thu Aug 30 10:32:10 2018_
_Originally opened as https://github.com/ERNICommunity/dust-measurement-network/issues/31_
----
**Actual Behavi…
-
Hi all,
In OTAA mode, only DevNonce and the JoinNonce are needed to be stored in EEPROM after the Join success. The LoraWan Stack (4.5.1), reads and writes “All data” very frequently (about each Up…
-
In grbl/config.h, line 38, set N_AXIS to 5
`#define N_AXIS 5 // Number of axes`
and compile. Get numerous errors of the form
> D:\Documents\Arduino\libraries\grblHAL_Teensy4\src\T41U5XBB_map.h:2…
-
Hi, I have a couple of Nucleo 411 boards lying around and was wondering if it's possible to put your grbl onto one. I assume I'ld use the STM32F4xx driver. I've only ever used the STM web IDE so if it…
-
I have been using FRAM_I2C, on a ESP32-WROVER with a I2C MR44V100A (128Kx8) FRAM, for some time now without any problems whatsoever. However with the release of FRAM_I2C version 0.3.0, PlatformIO has…
-
Hi!
Is it possible to store Strings or DateTime type(from Arduino RTClib) in FRAM?
Can someone share a code snippet that does that? I tried to edit "store anything" example, but adding a String typ…
-
Hi!
I just got a few **FM24C64-G** chips from AliExpress:
https://www.aliexpress.com/item/1PCS-Fm24c64-g-fm24c64-24c64b-24C64-G-SOP8/32832467105.html
According to its datasheet (http://www.farn…
-
The `pins.c` of the imxrt1010-evk has some pin names (at least D4, D5, D9) which are not actually brought out at the expected spots on the Arduino-style headers due to some DNP ("do not place") resist…
-
Seen this Robotdyn STM32F303CCT6 board Today, on another forum. Some serious features for $5. Twise the speed of the blue pill and more.
https://robotdyn.com/stm32f303cct6-256-kb-flash-stm32-arm-cort…