-
I read this: "If someone wants design a new converter cable, we could make them work." in
http://docs.ev3dev.org/projects/lego-linux-drivers/en/ev3dev-stretch/sensors.html
I made this converter ca…
-
As I really need a backup from a "virgin" Pluto Plus v2 I am writing this article in hopes someone is so kind to provide the files, thank you! (PS: It will also help you in case something goes wrong a…
-
I can't add the keyboard and mouse devices, because my phone freezes for a while and then reboots
`ROOT - Execute command: for dir in /config/usb_gadget/*/; do echo GADGET_PATH=$dir; cd $dir/config…
-
----------------------------------------------------------------------------------------------------
| Required Info | …
-
# WARNING: Filling out the template below is NOT optional. Issues not filling out this template will be closed without review.
FIRST: Before reporting any bug, make sure that the bug you are re…
-
A Pluto+ Release V2 has 3.3V on JTAG connector instead of 1.8V
If you upload 0.33 on these devices the Bootloader is destroyed and you have a Bricked device
**!!! Be Warned Recovery is not so easy !…
-
i'm downladed image from link. then copy it to sd card.
after boot i try to follow steps on how to setup pynq.
first i found libiio v0.24 already installed.
then i download libad9361 as mentioned
…
-
### Describe the bug
Not a bug, but a request to add support for the [INA260](https://www.ti.com/product/INA260).
### Steps to reproduce the behaviour
N/A
### Device (s)
Raspberry Pi 4 Mod. B
##…
-
SoapyPlutoSDR currently only works when PlutoSDR is set to its default factory setting. Can this be made more flexible to allow for other IP-addresses or hostnames?
Many thanks.
-
Is there a description of the XML format somewhere? I don't have any physical IIO devices around that I can use to generate one from.