-
g++ -lstdc++ -gddb -m64 -L /home/dell1804/refer/ws_carte_impedance/build/kuka_lwr_hw/reflexxes-prefix/src/ReflexxesTypeII/Linux/RMLPositionSampleApplications/../../Linux/x64/debug/lib/static -L /usr/l…
-
hi,
my goal is to calc an impedance spectrum with an arduino.
Is it possible to calc complex amplitude for only specific frequencies with arduinoFFT?
any help is appreciated!
-
[output_right_channel.wav.zip](https://github.com/user-attachments/files/16929148/output_right_channel.wav.zip)
-
Hi!
I have designed a Board based on the documentations available at Analog devices website.
I dont use ADICup3029 Board, I am using NUCLEO-F411RE.
I want to use AD5941 to measure Battery Impedance…
-
Initial spec:
- 32:2 mux that allows continous impedance/continuity/crosstalk measurements of the entire chain from Fastino down to ion trap using VNA/Impedance meter without disconnecting from Fasti…
-
Would it be possible to add a read routine for the EZStat file format which has frequency, |Z|, phase, Re{Z} and -Im{Z} as its 5 columns with a header line. The specific EZStat code would be as follo…
-
**Describe the bug**
The gear ratio not taken into account when calculating the PTO kinematics such as the position and velocity. For tutorial 1, I plotted the WEC position and PTO position side-by-s…
-
Hi all, I think there is a problem with the calculation of parameters r and x of the transformers in case of short circuit.
I have a a 150 / 16.25 kV transformer that feed a 15 kV network and the sho…
-
**Goals**
_1. Injection issue_
- [ ] Extract new RCC dspf netlist without diodes and all net extracted to see a more accurate vin_test pulse decay
- [ ] Simulate with new netlist and plot results…
-
I get this error when I launch franka_example_controller.launch.I used the newest franka_lib and franka_ros.
started roslaunch server http://superkai-OptiPlex-5040:41125/
SUMMARY
========
PA…