-
### Description
- Type: Bug
- Priority: Major
---
## Bug
**Target**
KL25Z
**Toolchain:**
GCC_ARM
*_Toolchain version: arm-none-eabi-g++ (GNU Tools for ARM Embedded Processors) 4.9.3 20150529 (rele…
-
Trying to use custom targets as documented says target is not a supported mcu.
```
Jacobs-MacBook-Air-3:BLE_LED jacobrosenthal$ mbed compile -c -t GCC_ARM -m k64f_myapp
usage: make.py [-h] [-m MCU] […
-
Building an application with `--profile mbed-os/tools/profiles/debug.json` does not filter correctly for the `TARGET_RELEASE` and `TARGET_DEBUG` folders.
In particular:
* In a release build, `TA…
-
@stevew817 (At least I assume I should bother you with it)
If you look at random other target, the initial stack pointer is set to top of the RAM: https://developer.mbed.org/users/mbed_official/code/…
-
### Description
- Type: Enhancement
- Priority: Minor
---------------------------------------------------------------
## Enhancement
**Reason to enhance or problem with existing solution**
T…
-
Hi,
would it be possible to port micropython to the NXP/Freescale KL25Z? It's capable of running micropython, and is an ARM device so porting wouldn't be too hard. Asking here because I have no knowle…
-
I am trying to use conan for embedded code (specifically here, on a NXP KL25Z that hosts a Cortex M0+ core).
I have prepared the [`platform-kl25z`](https://gitlab.com/Overdrivr/platform-KL25Z) module…
-
I am using pyOCD to flash the firmware onto the board. Since today, I cannot flash my KL25Z anymore. When I run the command `pyocd-flashtool --chip_erase -t kl25z` I have the error message: `ERROR:roo…
-
### Description
- Type: Bug
- Priority: Blocker
---------------------------------------------------------------
## Bug
Trying to debug issue #3387, I am blocked by the fact that I cannot export f…
-
Need to understand how to appropriately upgrade firmware of the ARM chip without corrupting / destroying the ARM memory.
Possible references:
- [Writing Data To Flash During Program Execution With Th…