-
I am using pycom.
I got a fipy running nano gateway and lopy as node.
I get connected and I can receive messages on my mqtt rx channel.
But when I try so send message back to node I have estr…
-
This Pysense MPL3115A2 bug has been [confirmed independently by two forum users](https://forum.pycom.io/topic/2322/mpl3115a2-hangs-intermittently/), myself included.
Within a minute or two (it vari…
-
It seems to be looking at the right places:
```
-- Found Arduino Platform: /home/blasco/.arduino15/packages/esp32/hardware/esp32/1.0.2
-- Found Arduino Platform: /home/blasco/.arduino15/packages/…
-
Hello,
I have determined that there is an error in the i2c protocol that allows it to timeout prematurely. In some i2c sensors (often ones that have a microcontroller in them for data fusion), the…
-
I have new(ish) Fipy boards with Pysense expansion boards,
Tried to update the firmware using the updater tool on Windows. This connects ok on com port.
The update tool proceeds until it starts…
ghost updated
3 years ago
-
Hi, and hello,
since some days I'm facing issues connecting my Lopy.
And after three days of searching...
## What are the steps to reproduce this issue?
1. tried it by UART-Adapter
2. tried i…
RoAKr updated
3 years ago
-
Hi,
I am trying to use the 'sender' example on my TTGO ESP LoRa32 (V 1) board with a LoPy as a receiver (actually running as a nanogateway from the examples)
I am not getting any packets through -…
-
LoPy-4 with firmware release 1.20.2.rc13 (July 2020):
>>> from network import LoRa
>>> lora = LoRa(mode=LoRa.LORAWAN, region=LoRa.EU868)
It hangs after 1 minute the LoRa class object load fails and…
teusH updated
3 years ago
-
Hi,
I'm looking forward to experiment with Chirpotle with LoPy4. Is it possible to use the associated Pycom Expansion Board instead of usb-to-serial converter?
-
I am not sure why this is happening, but running the paxcounter on Pycom LoPy4 (in a Pycom Expansion Board 3) power over USB - the LoPy4 gets damaged beyond repair. It looks like an overheating issue …