-
1.安装febootstrap
https://www.dwhd.org/20160630_111307.html
2.构建目录结构
```
febootstrap -i bash -i wget -i yum -i telnet -i iputils -i iproute -i vim -i gzip -i tar centos76 centos76-extend http://mi…
-
如题
-
This is a truly nice feature in kitty for kernel dev:
https://sw.kovidgoyal.net/kitty/kittens/transfer/
E.g. if I have some test VM, FPGA board, SBC or similar, for which I might only have IP th…
-
### Describe the bug
When attempting to create an ssid bridged to a vlan-tagged lan interface, Openwrt does not forward the traffic received to the wifi interface.
Traffic from the wifi interface …
-
这个路由器我在hanwckf那里看到了适配机型,但是ChongshengB这里没有,我用的云编译是C大神的不知道能不能用在H大神那里,插件可不可以同样安装,因为有很多未知的问题,如果C大神能适配一下,就更好了。
-
Similar to iterm2 on mac, you can use the imgcat command to display images directly in the terminal, and use the it2dl and it2up commands to quickly upload and download files.
-
I built U-boot following the instructions on Github and everything seemed to compile properly but after flashing it seems it was a bad build. I’m trying to recover the firmware using the instructions …
-
### Describe the bug
云编译X86 MTK RK系列均会报
WARNING: Makefile 'package/feeds/telephony/freeswitch/Makefile' has a dependency on 'libpcre', which does not exist
### ImmortalWrt version
ImmortalWrt SNAP…
-
搞好了,我是macOS下的iTerm2,有进度条,比lrzsz好多了
### 问题
1、为什么同时写两个语言的版本?因为如果是我写的话,肯定集中精力写好一种语言的,因为对用户来说,无论哪种语言都一样用;
2、go版本似乎无法独立使用,因为`trzsz-iterm2`是python写的,它好像是依赖于python版本的trzsz,我个人喜欢go版,希望go版本自带`trzsz-iter…
-
# 注意
## DHCP分配IP上网
- minimal版建好后上网
```sh
cd /etc/sysconfig/network-scripts
sudo vi ifcfg-ens33
# 修改BOOTPROTO=dhcp,ONBOOT=yes。
```
systemctl restart network
## NAT固定IP
0. 在本机以太网设置共享给VMnet8
0…
cisen updated
2 years ago