-
I am having an issue uploading the firmware via a sdcard to the BTT SKR2 board. When the firmware is inserted via an sd card the board is not detected. In case it was a faulty board i uploaded Marlin…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
No real big problem, maybe a small bug?
I've found out that my printers with current marli…
-
Is it possible to have an axis keep moving until a pin is triggered, similar to how the homing works, but during a standard move command?
For example. I have a special use for the printer and I wou…
-
### Description
Hi, I am not sure if this is a bug or not, so I file it as a feature request. I've been printing with arc welder (done in cura) using an Octopi and experienced a lot of stutter on d…
-
- new type
- function call
-
**Issue by [Roxy-3DPrintBoard](https://github.com/Roxy-3DPrintBoard)**
_Thursday Mar 17, 2016 at 22:41 GMT_
_Originally opened as https://github.com/MarlinFirmware/MarlinDev/issues/395_
---
This is…
-
I'm trying to setup my new Azteeg X3 Pro, printer was previously working well on RAMPS 1.4. As a note, it's a custom printer, but works as a standard Cartesian. I've downloaded the release version of …
-
Hi Javier, thanks for this repository. Sorry if I'm writing here but I cannot find a way to contact you (email).
I'd like to know if the firmware that you have named "stock" is exactly the same that …
-
### Bug Description
E steps set incorrectly for stock Ender 3 Pro and the TMC RMS is too low.
The E-steps causes nearly double the extrusion and the RMS causes very noticeable skips on the extrude…
-
As mentioned in [the advance dev thread](https://github.com/MarlinFirmware/MarlinDev/issues/402), I'm getting communication errors when printing over USB. The error messages are:
```
Resend: 380
Erro…