-
Some time ago there was a nice fork by @mariusgreuel to implement WINUSB support to replace the 3rd party dependency on the obnoxious **libusb-win32** implementation.
Please consider to implement:…
E3V3A updated
3 years ago
-
Hello,
I'm using an attiny85 digispark module with firmware micronucleus-1.11-entry-ext-reset-upgrade.hex and a push button on P5 to start the download.
I do not see an equivalent version in the 2.0…
-
I'm not convinced it's correct, currently...
Right now, it gets the flags, clears them all, and then jumps to app if it was a reset cause that shouldn't start bootloader... but that means that whe…
-
Hello.
I have a problem in getting the board detected by my Linux machine if it's already connected at boot time.
The only message I see with `dmesg` is:
```
[ 1.500000] usb 3-2: new low-speed …
-
I have a cheap digispark clone, the one with the USB plug.
I think that I messed up the bootloader.
How to re-flash it?
At the moment the board (it seems) is not recognized when plugged in.
`d…
-
I am looking to use your package with an ATtiny85 development board with USB - similar to offerings from DigiSpark.
I am using a fresh install of the 1.8.13 IDE and ver. 1.4.1 of you package...
…
-
When setting sleep mode to save power, also enabling pin change interrupt to wake up the device as soon as the IR receiver detects an IR stream, I wish to know which is the best way to resume IRMP fro…
-
Although mn doesn't use vendor, product, or configuration strings, it still builds in string0 (language string descriptor). Removing this code, saves 28 bytes.
You can test it without actually remov…
-
I am coding in Atmel Studio 7 with DxCore board AVR128DA28 using the VMicro extension so I can debug with Visual Studio native tools. The top-level module is an .ino module so it is a sketch. However…
-
It would be nice to add [Arduino Digispark](https://github.com/digistump/DigistumpArduino) support (ATtiny85-based board).
When we try to upload the firmware (just a blink example), it raises the f…