-
The join request has a timeout of 60 seconds:
```
bool join() {
sendAT(GF("+JOIN"));
if (waitResponse(60000L, "+EVENT=1,1") != 1) {
return false;
}
return true;
}
…
-
I pulled the 1.1.8 version today and attempted to upgrade the firmware. I received the following error during the verify (compile) phase:
`Verifying...
/Users/stevenslupsky/Library/Arduino15/pack…
-
I am not sure if this is a bug yet.
While experimenting with the example code, I noticed that the port number changes from time to time. I have not figured out why it changes yet. I have seen it …
-
I have two arduino MKRWAN 1300, and want to send & receive by point to point. One board I loaded LoRaSender, the other board I loaded LoRaReceiver. I didn't change original code. But, the receiver can…
-
-
Hey,
I can only find the SPI driver. Is there also a way to use a UART module? Like the E45-TTL-100?
Or do I need to add an own driver for it?
-
Hi :) Just wondering if there is anything documented on how you can activate/deactivate ADR in the firmware? I'm trying to use the MKR1300 as a TTN Mapping node, but it appears as though ADR is activa…
dan0h updated
6 years ago
-
I can't burn the bootloader to the Arduino Zero using ArduinoISP _(Duemilanove = Programmer, Zero = Target)_.
Before you select the board, Arduino IDE says "**incorrect device signature**", which is …
-
Will you be providing a utility to read firmware version and to allow to re-flash of new firmware version as they become available from muRata or ST-Micro??
I do see a FWUpdaterBridge.ino in the Ar…
-
Sometimes you have different devices reporting to the same application different data. The TTN backend allows you to tell one from the other in the decoder based on the application port the message ha…