-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
My device is oneplus 3.
Primary rom: open beta 24
It will stuck at boot screen if update ramdisk.
Primary rom: lineage 14.1
It will get some error when add rom.
erro:
verify_modem' error(op3.ver…
-
Hello,
I'm working to create a software to send/receive audio/messages using DMR protocol.
Currently I arrive to do the RX/demod using a uggly flow graph (GNU Radio flowgraph (verry uggly and CP…
-
Hi,
We are creating the ARGO module (Raspberry Pico footprint) based on nRF9151 SOC
https://wizcube.eu/argo.html
We also planning a new wizcube module code name M10LR01-01 PCB
On board a mini-P…
-
The 4G modem at AMS keeps falling back to 2G due to poor signal.
We should try upgrade the antenna to see if it helps.
-
### qmi was not starting but fix has now beeing merged
https://github.com/openwrt/openwrt/pull/13324
I've now a running 5G Hat integrated into my system. It's running very good over qmi with m…
dr-ni updated
9 months ago
-
It seems that for both phosh and plasma mobile, I cannot connect to the modem and use it.
It is shown in lsusb and the general settings however that it does exist which means it must not be communica…
-
The current WiFi MODEM code lives monolithically inside sio/modem.cpp.
This should be re-factored outward into its own library under lib/ so it can be used by other peripheral buses (and by CP/M)
…
-
```
Hello!
How can I add a new 3G modem? In particular, interested in Alcatel OneTouch
X310E.
Thanks in advance!
```
Original issue reported on code.google.com by `icera...@gmail.com` on 14 Oct 201…
-
I Try to add the following device. But i'm stucking on the ETH.
I did the menuconfig and tried to set every possible setting to get a working **"4G NIC example"**
After uploading i will get the fol…