-
I get no responses on /esp32radout/status when issuing commands to set temps, after a few days working without problems.
Can't seem to Rescan neither it just keeps on Scanning... forever. Reboot also…
-
**Describe the problem you have/What new integration you would like**
Add support for LoRa WAN protocol like RFM95
**Please describe your use case for this integration and alternatives you've …
-
**Describe the bug**
In Home Assistant (HA Core 2023.3.6) the `device_tracker.xiaomi_smart_band_7` entity's attribute has `source_type: gps` even it should be `source_type: bluetooth_le`.
Interest…
-
Anfrage aus Forum. Topic: https://forum.iobroker.net/topic/55426/test-adapter-device-watcher-v2-x-x-github-latest/1345?_=1686739165281
> Devices über OpenMQTTGateway bei mir drin.
> Das läuft auf …
-
Firmware: esp32dev-rtl_433
Version: 1.7.0
Uploaded from web
When receiving a signal from the station Oregon-THGR122N, it restarts and freezes after several reboots. Console output:
rtl_433_ESP(6):…
-
**Describe the bug**
I have a wireless 433 MHz 3-button device. Under version 1.6 my LilyGo 433toMQTT running OpenMQTTGateway was working fine. All 3 buttons produced a unique signal which I was ab…
-
**Summary
I don't use the default autodiscovery MQTT topic of "homeassistant" within my Home Assistant (HA) environment.
If I configure an OMG device (eg lilygo-ble) and set the base topic to be t…
-
There has been several issues with problems with wifi not connecting. But after restarts it works.
Or every other restart it fails
Sometimes there are errors like wrong password, or ap not found
…
-
I have the same problem. No steps get transfered freely. Must be a Xiaomi Band 7 firmware issue. Any idea?
_Originally posted by @michi1972-dev in https://github.com/1technophile/Open…
-
### Platform
ESP32
### Description
We installed a node at the top of the tower of a church, which has excellent area coverage, but is really hard to reach for updates. The node is connected t…
Noki updated
3 months ago