-
Hi All,
Last weekend I received the OTGW from Nodoshop and have it running with a Chronotherm IV Thermostat and Intergas HR 36/30 stable since then (firmware version 0.9.2+e9c35e9 (08-01-2022)). Wh…
-
Hi and thanks for the great FW.
I use the firmware on a Nodosvop v2 with a PIC16F88 on PIC FW 5.0.1 and MCU FW 0.9.5+4eb7d24 (30-05-2022).
It's configured on a MQTT server that I run in a container …
-
### The problem
Since this week (but may be much longer since I didn't use it for long until I create a new automation), controlling the Domestic Hot Water Mode of my OTGW is no longer working. I can…
-
Hi.
I have an old PCB as described at https://otgw.tclcode.com/ (I bought from Node Shop few years ago).
Right now I'm using a remote connection with otmonitor an a ESP8266 with Ser2Net (ESP Eas…
-
Hello,
I flashed Wemos D1 mini and after flash I have only this on serial output: "wrong chip id 0xf4fc"
Where can be problem? I flashed it with this command: "C:\Users\ropo\AppData\Local\Ardui…
-
I've implemented an ESPHome Thing in Openhab via the Homeassistant discovery. Now I'm getting a warning in the log every time OpenHab is starting up. I'm running OpenHab 3.0, but I also had this probl…
-
I'm trying to build with arduino-cli, which works fine after installing some libs which are not added as git submodules yet.
After building there is a /tmp/arduino-sketch-* folder, which contains the…
-
Hi, I am trying to use the DIYLESS gateway together with the example ino. Sadly I encounter numerous errors in and on missing libraries.
As I am searching the missing libraries and loading these "mi…
-
Hi Erik,
Can I add Intergas to homebridge? I installed homebridge on rpi and add plugin otgw.
Do you have a video or guideline how to do?
Thank you
Trik
-
Hi Robert,
In regards to your PM, I'm posting the same question I also posted on the domoticaforum.eu here.
For original post: [https://www.domoticaforum.eu/viewtopic.php?f=75&t=13381&sid=132eba…