-
uifor updated
2 years ago
-
大佬你好，使用的是Armbian_2022.04.28-PuXiongfei_Phicomm-n1_bullseye_edge_5.17.5.img
写入到u盘，未做任何修改，上电后，到启动内核的阶段，就直接循环重启。
是哪里需要修改吗，也没看到哪个文件指定了dtb文件
-
From the official NOTE, S905D is supported by EmuELEC 4.5, even if S905 is not.
> IMPORTANT: S905 (GXBB, p201) for the moment is no longer supported. If you have one of those devices (s905 no lette…
-
I tested 5.15.x and 5.17.x kernel with phicomm n1, both have no HDMI output, but 5.10.x works fine, what's the problem?
-
**I currently do not have such a device to further debug and develop**
A proprietary dtb format starts with ``DA04`` is used in Phicomm devices, mainly N1 as I've only seen reports from a user with…
-
I've created a user named jerry on first startup configuration, but i don't have sudo access.
Device: Phicomm N1 (s905d)
Kernel: 5.10.119
Armbian branch: current
Armbian release: jammy
Here is th…
-
### Verify Steps
- [X] Tracker 我已经在 [Issue Tracker](……/) 中找过我要提出的问题
- [X] Latest 我已经使用最新 Dev 版本测试过，问题依旧存在
- [X] Core 这是 OpenClash 存在的问题，并非我所使用的 Clash 或 Meta 等内核的特定问题
- [X] Meaningful 我提交的不是无意义的 催促更新或…
-
章鱼星球刷了这个Armbian_22.05.0_Aml_s912_focal_5.15.35_2022.04.21.0021.img.gz，已经写入EMMC成功，启动不了，启动也没有显示输出，刷入W大的[Armbian_5.96_Aml-g12_Debian_buster_default_5.3.0-rc8_20190910](https://pan.baidu.com/s/1QyFdhbVhJj…
-
**设备信息**
Base on OpenWrt R22.3.13 by lean & lienol
Kernel 5.16.18-kissyouhunter
Packaged by kissyouhunter on 2022-03-29
PLATFORM: amlogic SOC: s905d BOARD: n1
设备信息： Phicomm N1
CPU 型号: A…
-
Phicomm-N1 : DMA-thresh. and s905d-ki is mean?