-
Hello, tang is most useful as a small, dedicated, energy efficient device. Arduino fits very well. Any chances tang can be compiled for it?
Also good alternatives would be [Raspberry Pi Pico W](htt…
-
### Port, board and/or hardware
Raspberry Pi Pico
### MicroPython version
MicroPython v1.23.0 on 2024-06-02; Raspberry Pi Pico with RP2040
### Reproduction
```py
import os
def core1_t…
-
I am trying to make an lpf FIR filter run on my pico pi. I use VS code and the examples from your filter project. In VS Code I am not able to get rid of the import error on "from fir import fir". Read…
bf194 updated
2 years ago
-
I am a newcomer to the RTOS world and I am learning how to use NuttX.
I am following some introductory articles to Nuttx written by Alan C. Assis (You can see [here](https://www.embeddedrelated.com…
-
i tested this library by connecting it to raspberry pi pico W and grove lora e5 and i couldn't upload the code since it says the board is not compatible and error appears. i would like to send sensor …
-
The title of the project suggests that this project is intended for a raspberry pi pico (the microcontroller), yet the code and "Hardware" section imply only the use of the computer boards (specifical…
-
This is still a very important problem. The Pico W cannot connect to the Wifi because Thonny returns a "Traceback (most recent call last):
File "", line 9, in
ImportError: no module named 'networ…
-
In Connecting to the Internet with Raspberry Pi Pico W section 3.8.2. (HTTP with urequests) the note "HTTPS works, but you should be aware that SSL verification is currently disabled." was a bit confu…
-
Bluetooth & Switch controller support ?
just a thought
-
The battery ideally should have over 2-hour life when powering Raspberry Pi Pico W, microphone, cellular chip, and ILI9488 screen. Also needs a charge controller, and a constant 5V output