-
2 of 3 Virtual Inverters are not found. the third , exactly the same, ist found and works well. So ID 32 is online, 33 and 34 are missing.
Greetings and thank U so mutch for the work,
Joe
-
In seltenen Fällen kommen über den MQTT-Broker Werte, die offensichtlich nicht stimmen können.
Es wurde von Fällen [berichtet](https://github.com/orgs/solectrus/discussions/3439), wo ein Growatt W…
-
I appreciate the changes introduced with this PR, i.e., the work done in the upstream project to use TaskScheduler in favor of extending the `loop()` paradigm. This has the potential to …
-
Hi Michael.
Its not a really issue just only a newbie question. Your sketch is awesome!
Im curious It would be possible to get/set more data as described at https://github.com/victronenergy/venus/w…
-
### What happened?
NRF Chip verbunden und konfiguriert, nach Aktivierung des AC Ladegeräts ist der NRF Chip nicht mehr verbunden
### To Reproduce Bug
NRF einrichten, AC Ladegerät aktivieren
### Ex…
-
Hi! I love what you’ve got going here. I recently built a battery pack with three Daly BMS and I am attempting to establish EXTBMS comms with SMA.
I saw your post on a forum and I have some rPi 4b’…
-
can we modify this to work any a modbus -> tcp adapter over ip ?
-
### What happened?
My Pylontech-Battery is not discovered automatically within Home-Assistant.
I checked with MQTT-Explorer and can see the current battery-values published to the topic `solar/batte…
-
### Is your feature request related to a problem? Please describe.
When the SoC, for whatever reason, drops so low that an immediate charge is requested by the Pylontech battery, to avoid damage, c…
-
I have connected a Plenticore Gen1 to a Leaf 30 KWH battery.
On the Plenticore: CAN H , CAN L, GND, 12 volts, 120 ohm resistor. BatteryAllowsContactorClosing = true
SSR+ and SSR- are shut,Led on, …