-
What kind of issue is this?
- [x] **PlatformIO Core**.
If you’ve found a bug, please provide an information below.
------------------------------------------------------------------
### …
-
Hello,
First, thanks U for this library ! 👍
I want to use her with a "Wemos D1 Mini" board. When i compile the exemple program named "PZEMSoftwareSerial" i have the following error code :
`C:\…
-
Hi,
So as I have wrote in that long title after some hours I got a working SAMD21 with pzem-004t-v30 using Uart/Sercom.
First thank @mandulaj for your work :-D
ie: I got inspiration from the Tin…
-
I've setup 2 PZEM-004T-V3 to monitor my small off-grid solar installation, 1st one is on input and 2nd one is on output.
During my testing I just plugged in both to the same socket, so they are bot…
-
Hi, I tried connecting the PZEM-004T energy monitor and it seems that on page https://github.com/arendst/Sonoff-Tasmota/wiki/PZEM004T-Energy-Monitor the configuration for TX and RX is inverted.
Att…
-
-
I use PZEM004T connect to Arduino it work smoothly, but when I connect to ESP8266 it isn't working. It only display **0.00V;** on Serial Monitor Arduino IDE.
VCC-3.3V
RX-D8(GPIO15)
TX-D7(GPIO13)
G…
ntdgo updated
3 years ago
-
### The problem
After upgrading from core version 2021.5.5 i get this error:
homeassistant.exceptions.ServiceNotFound: Unable to find service variable.set_variable
### What is version of Home A…
-
Its possible to read a current and know the way flows?
For example, to monitoring a solar photovoltaic system that send current to the grid.
I have found the device on aliexpress and i wish to o…
-
Would it be possible to add an additional constructor to map a hw serial port to new pins? It would be particularly useful when using Heltec ESP32 LoRa V2 to map Serial2 to two of the few available pi…