-
@RavenSystem I'm using a ESP-01S connected to a relay (relay v.4) with latest firmware. In your guide you write "For ESP01 with a button connected to GPIO0 and a relay connected to GPIO2". Actually my…
-
good night, after the setup that worked perfectly, I reset the wifi network by clicking 10 times at boot time and it worked.
But after setting up the new wifi network, which also worked perfectly, …
-
There is a problem with repairing a device.
Firstly I flashed firmware and was able to see device sonoff basic, as Device Type [Default: 1] and then I've changed device type to 10 (as I wanna blink …
-
I’ve ordered a couple of Shelly 1 devices that i’d like to run RavenCore on (I'm currently doing this with a few Sonoff Basic devices). My question is regarding the Shelly button type of “Edge” and wh…
wsc96 updated
5 years ago
-
Does Ravencore support the rwjf-02a dimmer switch ?
Thanks.
Rick
-
Hi!
Would be possible to implement a timeout option for switches that after few seconds (lets say 2, 3, ...) they come back to initial state? This option it would be useful for an electric strike …
fcesc updated
5 years ago
-
Hi!
I have a Sonoff SV with RavenCore software and I have a problem. I use it for my garage door.
A few days ago I changed my Wifi router and I wanted to change wifi settings in Sonoff
…
-
Sonoff 4ch, under ios13, everything appears as one device . Same is true for temp+switch. Can we split this up?
-
Hi,
I have Shelly 1 with RC. It worked fine for about 2 months.
Now It is not responding in HomeKit and I see WIFI network Ravencore-xxxx, but my iPhone isn’t able to connect to this network.
Wha…
-
Hello.
Thank you for this great job.
I use it in a lot of devices.
Recently I've installed a shelly 2,5 in a roller Shutter.
All works OK except external toggle.
I have a roller switch and I t…