-
ESP32 supports uploading over UART1 (GPIOs 9 & 10) if a sync signal is sent to UART1 RX after booting into bootloader ROM mode. However the flasher stub is currently hardcoded to UART0.
esptool.py …
-
failed to build the wifi_router example
```
Executing action: all (aliases: build)
Running ninja in directory /Users/dilsh/Documents/fyp/esp-iot-bridge/examples/wifi_router/build
Executing "ninja …
-
## Origin
This is a repository containing the Realtek SDK, which currently includes the Ameba SOC series. In the future, it will also include drivers for other SOCs in our company.
https://github.…
-
Hi guys,
I have an issue, with No Network/Service, as soon as I flash custom GSI ROM.
If I flash back to Stock 8.1, everything is working again. Whenever I flash any GSI ROM, for example AOSP 9…
-
Not an issue, but something I figured out for my self, so I thought I'd share.
The device I'm targeting doesn't have a working recovery environment, so instead I used https://github.com/ookiineko/m…
-
Hello, I tried to edit my version where I only changed the names and I got this error
####################################
![hack](https://github.com/Kl0ibi/esp32_hackingtool/assets/43080051…
-
esp323s3 here, I'm able to boot into bootrom mode via BOOT0 and reset and can confirm if I open the device up with picocom (at the bottom).
But when the chip is in this mode I'm not able to program…
-
Hi,
I have seen in the modules that the decrypted gsid only from API 29-33 exist, thats why iam ASK for a Update than iam a convinced user of your Work, and i Tell about it!!! Its make the DSU Syst…
-
I'd love to run A/UX through this! [Unlike NeXTSTEP](https://github.com/mihaip/infinite-mac/issues/121), this is actual Mac OS.
-
### Describe the bug
The ROM of this device is 128MB and 256MB RAM. I noticed that I am only able to use 64MB (58.6MB) for installing the software in '/overlay' partition. In the storage section, t…