-
Hi,
Would it be realistic to port this for the Zero 2 W system too? I was what kind of pitfalls would one face for that.
It will definitely need some form of realtime priority, so perhaps set it to …
-
As below, I seem to be unable to copy any files to the device.
Also, even setting the --buffer-size=128 gets ignored and the 512 USB default is used.
Files are created with zero bytes, I also tr…
-
**Describe the problem you have/What new integration you would like**
I would like to see MQTT client support for ESPHome on the Raspberry Pi Pico W platform.
The existing MQTT client only…
-
First off, thanks for this crate!
I'm trying to decode a signal of a generic "Car MP3" remote, which apparently uses the NEC protocol.
When using the NecDebug protocol type, I always get the same …
-
Please could you add support for the new [RPi Pico (RP2040 MCU)](https://www.raspberrypi.org/products/raspberry-pi-pico/)?
It is a Cortex M0+ chip but I don't think any of the existing platforms co…
-
### Prerequisites
Please check the following before posting an issue / bug report.
- [x] I am running the latest version of the firmware found [HERE](https://github.com/OpenStickCommunity/GP2040…
-
Are camera modules v3 supported?
-
## Issue template
- Hardware description: Raspberry Pico RP2040
- RTOS: micro_ros_raspberry_pico_sdk
- Installation type:
- Version or commit hash: foxy
#### Steps to reproduce the issue
…
-
- Hardware description: Rasperry PI connected to RP2040 nano connect
- RTOS: NA
- Version or commit hash: Humble
Hello again,
I am running uROS on a RP2040 connect. As usual, for testing I am …
-
**Describe the bug**
I tried to build static files via `node node_modules/pxt-core/built/pxt.js staticpkg`, and it failed within the latest 2.0.3.
**To Reproduce**
Steps to reproduce the behavi…