-
Hi Bud,
I am currently using an Arduino Uno meaning that I am trying to use the Software Serial ports. Also, I am very new to Arduino so if you could dumb down the language that would be great!
…
-
## Description
In the [Progress Bar documentation](https://github.com/foundation/foundation-sites/blob/c845644c555516e35b871525168714bdf8b89150/docs/pages/progress-bar.md) the examples guide to a…
-
Hello,
I am using the library with TFMini Plus and Arduino MKR GSM 1400 board.
I connected the sensor to TX and SX serial ports on my board. I can get the distance data without a problem as that i…
-
* https://www.section508.gov/create/documents
* https://www.dor.ca.gov/State-AB434/Document-Accessibility/Resources.html
* https://www.hhs.gov/web/section-508/making-files-accessible/index.html
* h…
-
Hi! I'm working on an obstacle avoidance system using TFmini plus. I want to know how do you obtain the getDistance value as an integer in order to turn on and off an LED depending upon the distance. …
-
Hi budryerson,
I am using your library for 1 TFMini Plus with SoftwareSerial and an Arduino Uno. I was wondering why so many readings are bad. So I wrote a little code to show it. I give you some ran…
-
We are a distributed team. We should have best practices that we are working on here.
### Resources
- https://www.ryerson.ca/accessibility/guides-resources/virtual-meetings/
- https://www.nad.org…
-
I make a call in the beginning of the code to change to I2C but it always returns "Serial" but no error with the SetCommand. Do I need a parameter with the SET_I2C_MODE command?
**Using Example cod…
-
For the current version, the LE of the DVEs has to match hinge line. For example, chord 10, flap 20%, m=5 works fine; m=6 does not work
Suggestion, adjust DVEs on flap that at least one DVE on flap, …
-
a few ways to do this. I can calculate the panel areas and add them up, and also calculate the projected panel areas and add them up. These values will not change with camber or flap deflection.
W…