-
Owing to water ingress.
Airlie beach technician recommends a network attached reader to be installed below -- [this one](https://buy.garmin.com/en-AU/AU/p/67781) looks good
@delcosta will be inter…
-
I'm working with @flexiondotorg and @waveform80 on publishing a [snap](https://en.wikipedia.org/wiki/Snappy_(package_manager)) for Mu, which will make it easy to install Mu across Linux distributions …
-
Hello!
I'am using the SparkFun_AK975x_Arduino_Library with a non-Sparkfun AK9750 module.
Every function of the library works fine.
I tried to implement interrupt management but I'am having bad re…
-
-
what am I missing here? what do I have to adjust to get the right numbers?
![untitled](https://user-images.githubusercontent.com/35321883/43936658-70a244ee-9c51-11e8-9e28-f349843c4acf.jpg)
-
Hi Timo,
thanks for the great library!
I want to build a binary switch bank and I'm currently unsure, what's the correct way to control the switches.
Should it be done by a pgn 127502 or by a…
-
Hi,
Yes this is not the correct way to send in changes but I'm not forking the whole project. For my own use I modified your script so I could add up to four data series on the y axis and have colors…
-
accelgyro.testConnection() seems to return false but my GY-521 break out board seems to be connected properly and later when running accelgyro.getMotion6(&ax, &ay, &az, &gx, &gy, &gz); it seems to…
-
Thank you for sharing your very useful code.
Instead of having dotted lines being plotted, I prefer continuous lines.
I modifed this section of your code accordingly as follows :
// Do act…
-
Installed and enabled kdump so we'll see.
Locked with both the standard Cent 4.18 kernel and 5.12.4 from elrepo. The standard chia plotter with 12 parallel processes was fine.
Turned SE/Linux of…