-
What kind of issue is this?
Problem while compiling firmware for SKR-e3 3d printer board
------------------------------------------------------------------
### Configuration
**Operating system…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
X and Y axis does not do SENSORLESS_BACKOFF_MM before diagonal move (QUICK_HOME).
In case X …
-
Hi,
I've played a bit with the new SKR mini E3 V1.2 board and liked it so far, but something was strange. After some time I've measured the head and bed temperatures, and they were too low.
My se…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
As soon as I am using the STM32 HAL (STM32F103RC_btt, STM32F103RC_btt_USB, STM32F103RE_…
-
compiled with latest version - effe6f6ddd5132db4ab4f88bf8616aab575e7691
Dmesg output when connecting to usb
```
[ 521.874046] usb 1-1.2: new full-speed USB device number 6 using dwc_otg
[ 521.…
-
Hii, i just updated the library and when i upload the new marlin with this library (0.60) all drivers send me error all low
Testing X connection... Error: All LOW
Testing Y connection... Error: All …
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
Tried compiling in both 2.0.9 and bugfix-2.0.x, but ran into issues. It looks like its in th…
-
PIO Core Call Error: "Library Storage: D:\\cr10\\Marlin-2.0.x-SKR-E3-DIP-master\\.pio\\libdeps\\megaatmega2560\r\n\n\nError: Traceback (most recent call last):\r\n File \"c:\\users\\mitro\\.platformi…
-
I am using a BLTouch clone in my setup and I am not seeing a trigger using the "Probe" connector. Is the something that I need to configure? I have tried it in the Z-Min connector and it works as expe…
-
### Description
Due to timer conflicts/lack of available timers, `SPEAKER` can’t be enabled on a couple of the SKR Mini E3 boards. This Feature Request is a continuation of comments from https://gi…