-
Hi, thanks for implementing those manifold structures in python!
I'm working with SPD data and I tried autograd to calculate the gradient of exp/log function with respect to the base_point in spd m…
-
Hi Jonah
I'm in the middle of building a DIY pit and have been going through your files to make a diy throttle and I've noticed that the Spd-Brk and DogFight-Knob would not be able to function as the…
-
A zone which blocks the player. This zone type exists in Influx Timer.
This is the code from influx:
```c
default :
{
float spd = GetEntitySpeed( client ) * 0.5;
…
-
**Important notices**
Before you add a new report, we ask you kindly to acknowledge the following:
- [X] I have read the contributing guide lines at https://github.com/opnsense/core/blob/master/…
-
Hola, no entiendo por qué en este test hector no muere en el round 6 (tenía 7 de vida al y después recibe 8 de daño post combate). Desde ya gracias :)
Round 4: Hector (Player 2) comienza
Ninguna u…
a-ck updated
4 months ago
-
_From @mbrubake on February 18, 2014 22:44_
Currently still uses inverse_spd/log_determinant_spd which may be less than optimal for large systems.
_Copied from original issue: stan-dev/stan#574_
-
### Steps to reproduce
- make orca produce long message
- kill it `-KILL`
### Obtained behavior
- the message continues
### Expected behavior
- we'd want the message to stop, so that e…
-
I would like to produce a facet that looks like the one below:
![image](https://user-images.githubusercontent.com/22034883/28701412-f6e0431a-730a-11e7-9993-556d74c9184a.png)
# **Note that each r…
-
This implements support for the i2c and i3c basic controller logic that will be required for the DRAM proxy and related access. These are blocks that provide the SP access as an initiator.
-
Is it possible to have the SPD HDMI packet to identify as "MiSTer"?
This was just added to the Analogue consoles, and means on supporting screens the input the device is plugged into is named accor…