-
## Issue Description ##
issue with srsUE sometimes get stuck in reading data from RF.
did somebody tested srsUE with BladeRF 2.0 micro xA4 ?
if yes, wich versions of firmware, libbladerf, srsRAN
…
-
I'm looking to experiment with 5gsniffer, and I want to set up a 5G testbed. Could you tell me what tools you used to create testbeds for both the 5G access network and the core network? I want to rep…
-
srsRAN Is this project an LTE pseudo base station?
-
I'm trying to run the "Developing a custom xApp in Python" section as mentioned in the https://openaicellular.github.io/oaic/xapp_python.html#connecting-to-srsran. However, I'mr receiving the followin…
-
## Issue Description ##
Following the 5G SA COTS UE [Application Note](https://docs.srsran.com/en/latest/app_notes/source/5g_sa_COTS/source/index.html), after running srsENB with sudo ./srsenb enb.co…
-
## Issue Description ##
I set up COTS UE connection I am not sure if it works, but in srsenb terminal I see connected message, but in srsepc there is message "DL NAS : Sending PDN connectivity re…
-
I am trying to implement the zynq_timestamping solution by porting the existing implementation into ZC702/ZC706 + FMCOMMS5.
Having as reference the Block design of the ZCU102 and AntSDR, I managed to…
-
## Issue Description ##
I used srsue with USRP X310 and srsenb with X310. The UE is able to connetc to the eNB. But after less than a minute, it begins to say warning radio link failure and keeps…
-
# Intro
First, thank you for your contributions with this project. I have been following FALCON for quite some time.
I have encountered a few segmentation faults while running UL mode against a loca…
-
## Issue Description ##
Building Raspberry Pi OS (armv7) fails.
## Setup Details ##
Using raspios_lite_armhf-2023-05-03 (bullseye)
## Expected Behavior ##
The build succeeds.
## Actual Beh…