-
Hello! I am trying to run the timer example following the steps provided here: https://nuttx.apache.org/docs/latest/components/drivers/character/timer.html
The few things that I do that I do not s…
-
-
Even in the latest version of the Marlin firmware, there is no definition to support the H723ZE chipset in the boards.h. How do I use it?
-
I'm getting this error:
'''
erwincoumans@Erwins-MBP build % psdb_flash_tool --connect-under-reset --erase
Probing with SWD frequency at 1.000 MHz
Set SWD frequency to 24.000 MHz
Erasing entire …
-
I'm working with a STM32H755. I recognised that the .svd files used (STM32H755_CM4 and STM32H755_CM7) are from May 2019. They are incorrect regarding the addresses of the `HSEM_CnIER`, `HSEM_CnICR`, `…
-
Create a driver for FD reference board: STM32H743 Nucleo-144 (ST micro)
-
I've just discovered that even if iis3dwb driver works well with STM32H7 if MCU Firmware Package is [v1.10.0](https://github.com/STMicroelectronics/STM32CubeH7/releases/tag/v1.10.0), after I upgraded …
-
This library models a serial error as such:
```rust
pub enum SerialError {
Overrun,
FrameFormat,
Parity,
Noise,
Impl(ImplError),
}
```
However, the NXP i.MX RT1062 ca…
-
### CircuitPython version
```python
Adafruit Circuit Python V7.0.0 Image from the website
```
### Code/REPL
```python
N/A
```
### Behavior
N/A
### Description
The STM32H743 Nucleo board doesn…
-
Hello, Ive been working with my Portenta h7 stm32h747 with onboard ulpi/ram/flash. Ive managed to get clock set/get for i2c/qspi working, I2c (only tested in master and not much), the external ram , a…