-
Hans
Mon 06 Dec 2021 11:57:08 AM UTC
Programmer hardware: serialupdi
I know this is a lot to ask, and I don't expect anyone to jump onto this immediately because one guy would find this incredib…
-
Testing Bloom with gdb 10.2 resulted in gdb complaining the response to the 'g' request is truncated. Inspection shows that the response is one byte shorter than the expected length of 32+1+2+4 = 39 …
-
First of all thanks for all the effort.
I'm not an embedded sys engineer so lack quiet a bit of internal knowledge.
I was looking for a small low power uC and the new ATTiny series were too temp…
-
In the latest (June 26, 2021) code, file /megaTinyCore/megaavr/cores/megatinycore/Arduino.h, I have left myself the following comments and felt you would also like to know what I did to make a simple …
-
See https://github.com/SpenceKonde/DxCore/issues/52
I need to port this to the tinyAVR 0/1-series parts.
This, as well as #208 would complete series of "modern" peripherals, bringing them all t…
-
I encourage you to steal the [Comparator library](https://github.com/MCUdude/MegaCoreX/tree/master/megaavr/libraries/Comparator). The porting itself should be fairly easy; much easier than the Logic l…
-
When using the ATTiny1626 with 8MHz >>external clock
-
Hi,
there seems to be a problem using the SoftwareSerialWithHalfDuplex library and the 1614 chip. I have used the ATTinyCore and ATTiny814 with this library and it works great, but I need more mem…
-
v2.9 compiled the a modified version of this [code](https://raw.githubusercontent.com/tetrabiodistributed/PAPRA-PCB/c38be3ee90f81fe9fc7fcec78938d70674fdf67d/firmware/papracode/papracode.ino) just fine…
-
Is there an explanation why this code worked fine on the tinyMegaCore (T3216) but not so with the DxCore (AVR128DB28)?
```
setup()
{
Serial0.begin(9600);
.
.
//-- sleep sleepMinutes min…