-
I found your project on Github and was curious: is the project working ok? If so, what hardware would you recommend? I have a `[TTGO Camera with mic](https://www.tinytronics.nl/shop/en/communication/w…
-
Hi there,
I got the ESP32 with an OLED display build on by TTGO. It has a pretty standard controller except the pixels are offset to get to location 0.0 (They are actually 52.40)
I added code to…
-
is it available class c?
thanks
-
I am new to ESP32 and LilyGO... I bought_ the T-Watch S3. I see this firmware doesn't support the T-Watch S3... could the T-Watch S3 be added? I updated my T-Watch S3 with the latest firmware and it l…
-
Hey.
I have two TTGO T-Beam V1 (433MHz SX1278) boards, one configured as a tracker and another as an iGate. The tracker seems to work correctly.
However, the iGate doesn't appear to have workin…
m1geo updated
5 months ago
-
I have two new V1.3 TTGO-Lora32 and as far as I can tell everything is configured correctly but the display is either blank or not working. I know the display is good because it worked with the stock…
-
## Overview
```cpp
esp32decode -e firmware.elf 0x40093e3a:0x3ffee2b00x40299cf1:0x3ffee2c0 0x402a0dc6:0x3ffee5d0 0x402a0e02:0x3ffee660 0x40182a31:0x3ffee6a0 0x400df6da:0x3ffee740 0x400edbe8:0x3ffe…
-
**Describe the bug**
After downloading the generated .bin file, the program will not run
**To Reproduce**
Steps to reproduce the behavior:
1. I followed the instructions at adafruit to install T…
-
I have a TTGO T-Beam v0.7 with OLED attached. After compiling with VS Code and platformIO (env:ttgo-t-beam-v0_7) I get the following error after upload and monitor:
```
rst:0x1 (POWERON_RESET),boo…
-
Hello,
I'm attempting to get Nuttx up and running with LVGL on the ESP32S3 TTGO T-Display S3. ([product link](https://github.com/Xinyuan-LilyGO/T-Display-S3)). As far as I'm aware there isn't curr…