-
* Subject: Vies-sion Fragen
* Wiki-Page: Vies-sion
* From: whwh
* Date: Sat, 19 Dec 2015 11:02:07 UT
* Message-ID:
Fragen zur Applikation...
-
* Subject: Kann man Programmcode beitragen?
* Wiki-Page: home
* From: ingo_s
* Date: Fri, 17 Mar 2017 21:47:19 UT
* Message-ID:
Hallo,
leider habe ich keine Hinweise gefunden, auf welche Weise man …
-
Hi and thanks again for your continuous work on this integration!
With the new version came a feature „'Warmwasser Disinfections-Anpassungen' verwenden“. Can you elaborate what this feature does an…
-
### Describe the bug
I use a Heater with a shelly Plug to heat water.
Unfortunately if i set a Temperature the Temp is reseted after every reboot.
Previously this could be set with min and max s…
-
**Describe the bug**
When I try to set the state of the daikin-cloud.....domesticHotWaterTank.powerfulMode, it is not set in the HP
**To Reproduce**
Steps to reproduce the behavior:
1. Try t…
-
Hello,
Happy to get the first values now from my Vitodens 200 WB2C.
But it seems, that the address tables for 200 here on the side does not fit to my model.
The burner status, partymode, energy sav…
-
* Subject: Einrichtung von vcontrold / vclient auf Raspberry Pi (Autostart) - wie ?
* Wiki-Page: Vcontrold Kompilieren
* From: Rakon
* Date: Tue, 10 Dec 2013 22:42:54 UT
* Message-ID:
Hallo,
ich ha…
-
auto driver does not recognise this combination
qwater seems to work correctly
https://wmbusmeters.org/analyze/49449344116853141a06780dff5f3500825a00005e0107c113ffff32230000ff2c100000001d322722000…
-
Ideas for Thermal desinfection
- [x] Allow to set a "thermal desinfection temperature" (e.g. default 60 C°)
- [x] Add a sensor date "last thermal desinfection". Means a date stamp the hot water temp…
-
With the Version V4.04 the Pellet Usage is not longer available in Homeassistant.
With nodered and the json command i got the values:
payload.pe1.L_pellets_today
payload.pe1.L_pellets_yesterday