-
I started new issue related to watchdog.
Other issue may relate to this one or may not. Until we get some confirmation, they are not ;)
Now after UART seems to work OK and we have DBG interface. I did…
-
I use your firmware, but dont use DeviceHive internet service at all.
ESP8266 device gets IP address via DHCP on Microtik router and Raspberry is asking sensors via your API every 2-5 seconds.
Afte…
-
bigromanovToday at 8:39 PM
@Hardman please open issue in github, we will do it
This was regarding a short question in which I coined the idea of a Watchdog integration into the cuda miner. Ideally…
ghost updated
5 years ago
-
See https://content.arduino.cc/assets/mkr-microchip_samd21_family_full_datasheet-ds40001882d.pdf for spec. details.
-
Hi,
i try to use a e paper 4.2bwr (tried it with and without "bwr") with an AZ-Delivery ESp32 Dev Board. But, I always get the same error:
```
`Trying to connect ...
[E][AsyncTCP.cpp:722] connec…
-
How can i stop watchdog or feed him in a infinite loop ?
I want shutdown my device properly. In a function, i suspend FreeRTOS, set some level pin and i want finish by a infinite loop until the dev…
-
Great bit of code, thanks for publishing it :-)
Just a note to mention that the latest ESP firmware seems to watchdog reset anything that takes more than about a second, I fixed the problem by adding…
-
Issue #37 has shown that there are many reason why a system can become unstable. If the basic design is not the problem and we are talking about improving an already reliable solution further, a watch…
-
No matter what you do, you will get this error
-
**Is your feature request related to a problem/context ? Please describe if applicable.**
Conditions arise where a node may become "stuck". Some of these conditions are known. For example, when a n…