-
Thanks for the library! I'm going to use to to upgrade an old RC car with an ESP8266 and use this as the controller.
I am getting consistent `OSError: [Errno 19] ENODEV` errors when I use your libr…
-
Hi,
I'm trying to use this library in combination with a Wemos d1 mini v3 and hardwareserial. I live in Belgium, and got a sagemcom t211 installed. I'm aware that Belgium uses a slightly different …
-
Not an issue, just a question.
I'm flashing about 40+ Wemos with esp-link. All Wemos have the esp12-swap setting. Is it possible to flash the Wemos with a config setting so I won't have to set that…
-
Hi,
Do I need to make alteration in the code (except for the pins ofcourse) to get this to work on an ESP8266 board.
I only get a question mark for the moment..
```c++
/*----------------…
-
I have "Wemos D1 mini" board , one of esp8266 boards. I downloaded the firmware to the board then it didn't work any more and when I tried to see the debug logs from the problematic board using terate…
-
Hello,
I am having a real problem with using the web based utility to install ESPHome on ESP32 devices.
I can install on a Wemos D1 (8266) with no trouble, but when I try with an ESP32-S2 or ESP…
bwims updated
1 month ago
-
### The problem
I have a Wemos NodeMCU ESP8266 v3 - CH340 (https://botland.store/img/art/inne/10908_3.jpg) and I noticed that after installing esphome on it, the device wasn't able to connect to wi…
-
Using Arduino IDE 1.8.2 I get these warnings, any suggestions on fixing?
/Volumes/Macintosh HD 2/Users/Documents/Arduino/libraries/WEMOS_SHT3x_Arduino_Library-master/src/WEMOS_SHT3X.cpp: In member …
-
Currently it fixed by feeding module with 3V3 bus, but test bench Wemos D1 worked on 5V without any issues.
Need to figure out why so.
[WORKAROUND](https://github.com/SequoiaSan/FlipperZero-WiFi-…
-
Does not it work with D1 mini Pro?
Arduino:1.8.7 (Windows 10), Płytka:"LOLIN(WEMOS) D1 mini Pro, 80 MHz, Flash, Enabled, 16M (14M SPIFFS), v2 Lower Memory, Disabled, None, Only Sketch, 921600"
I…