-
### Platform
ESP32
### Assembly
the DTU was already assembled
### CMT2300a Module
_No response_
### Antenna
external antenna
### Power Stabilization
Elko (~100uF)
### Con…
-
I have flashed the latest firmware (16.5.24) and I can access and change the controller settings page when connected via USB but when I disconnect the USB and power with 24v, I can no longer access th…
-
### Device
msi-pro-z690-a-wifi-ddr4
### RTE version
...
### OSFV version
develop
### Affected component(s) or functionality
Verified-Boot suite
### Brief summary
Verified-Boot missing `Make S…
-
For EV I though information like SoC should be available via API, Volvo did that at the beginning but limited API access to some region only. So I looked for another solution and found this project. T…
-
Most of the network drivers are compiled in or are automatically loaded at boot. The missing pieces are configuration in /etc/rc.conf and info in `/etc/wpa_supplicant.conf` to join networks.
e.g. f…
-
### Board
ESP32-S3-DevKitC-1-N8R2
### Device Description
.
### Hardware Configuration
..
### Version
v3.0.4
### IDE Name
PlatformIO
### Operating System
Windows 11
…
-
Hello.
I tried the kde themed version, everything worked fine during the install and Arch booted smoothly. Good job for you.
However, I've find that my Wi-Fi doesn't work after install. I'm using an…
-
I ran into an issue setting up the image for the Radxa 3W sbc that would not recognize the internal wifi card and it was showing up as the unmanaged card rt10. This manifested itself by nmtui not show…
-
**Describe the bug**
Error:CMD:cmd SENSOR NOT found in logs.
**Firmware:**
- Version: OpenBK7231N_1.17.740
- Device: WHDZ03 Smart Plug with Energy Monitoring (CB2S BK7231N + BL0937)
- Chip/mode…
jkwim updated
1 month ago
-
I know this is not directly related to your code as you don't maintain the python-networkmanger library, bit I can't seem to get this library to install on any OS/version that I have tried.
Do you…