-
I have a door opener by Overhead Door, so I need support for the dry contact switches. I'm hoping that can be enabled on this project soon.
-
Test software on Ubuntu/Beaglebone to see if it works.
* Background notes: https://wiki.openag.media.mit.edu/contributors/replacing_arduino_and_raspberry_pi?s[]=beaglebone#beaglebone.
* Status: ex…
-
I suspect this project isn't being actively maintained, but I was hoping to install it on an old Raspberry Pi I had lying around.
The compile.sh script obtained the u8g2 library code and seems to com…
-
Hi guys,
I have difficulties to compile the code because the following libraries are not findable. Can you help me ton find them?
#include
#include
#include
Best regards
CP
-
Has anyone modified any BBC Micro emulator that runs on a Pi, so that a second processor emulation could talk to it by wiring a GPIO to GPIO cable (ie no level shifters between the two Pies - just wir…
gtoal updated
3 months ago
-
I get this error when running homebridge:
This is my config file that has worked before:
Wiring Pi is installed:
Whats the problem?
-
I'm not sure where to begin with the diagnosis, but the garage doors open and close with the app, however, the states do not change. It was working and one day ceased to work. The wiring has not been …
-
I can't get my SB2209 working over CAN, need help:
I have an Octopus MCU with Klipper, which is connected via USB to CAN Bridge with my PI.
"~/klippy-env/bin/python ~/klipper/scripts/canbus_query…
-
Running Scratch 3 on a Raspberry Pi 5; the GPIO extension does not work.
It is not correctly detecting any of the GPIO ports.
I have tested using Bookworm on a Raspberry Pi 4 which works correc…
-
I'm trying to connect via serial to the TBS fusion using an ESP32 to create a half duplex connection the fusion module and then use the esp32 as a passthrough to my Pi4. Do you have an example hardwar…