-
Looking over the existing IR protocol design:
https://github.com/polyvision/EasyRaceLapTimer/blob/master/docs/ir_pulses.md
I thought of a situation that doesn't seem to have a solution in the curren…
-
Running romwbw cpm3 in my sc131; latest version (03 July 2021) of H19term.py crashed when attempting to run wordstar.
H19term set to ansi mode; SC131 and Wordstar configured for ANSI - work fine w…
-
### Platform
Cross-Platform
### Description
Sometimes it is more useful to send packets as fast as possible and not wait for acks (for example, when higher-level protocols handle retransmits). In t…
-
Most of it, with the exception of the XMODEM state machine which remains largely undocumented, are fairly trivial wrappers around the WonderSwan UART.
- https://github.com/asiekierka/AthenaOS/commi…
-
Was able to get the code onto the device up to the point where I need to download the zigbee firmware.
I'm not sure what the instructions refer to with all the code below the "download and reset bu…
-
After flashing it in the boot attempt appears the network initialization and then an error that does not start the system.
I flashed it again passing the image through xmodem (with dd after), also …
-
Hello,
I can successfully create an ESP32 image using the provided [`src/app/esp32` ](https://github.com/MitchBradley/cforth/tree/master/src/app/esp32) yet when I flash cforth to the board, it ca…
-
At the stage of loading via xmodem, a hang occurs. Perhaps due to the exchange rate of 57600, the full log is lower
```
root@OpenWrt:/tmp/elelabs-zigbee-ezsp-utility# python3 Elelabs_EzspFwUtility.p…
-
Add a small separate bootloader to the firmware with support for firmware update over the ATCI (LPUART1). There are a number of existing bootloaders for STM32 platforms on Github, so perhaps one of th…
-
I bought an Efergy e2 IR optical power meter (wireless transmission every 30s) a couple of days ago and received my R820T dongle two days ago. Installed and fired up rtl-sdr hoping Nathan's/Gough's c …