-
Leitura dos streamings FSCAN e GPS gerados pelo receptor EB500.
**Produtos iniciais:**
Função que tenha como argumentos de entrada o IP/Porta do instrumento a controlar, além da faixa de frequência a…
-
**`
Using Port : /dev/ttyCH341USB0
Using Programmer : urclock
Overriding Baud Rate : 115200
AVR Part …
-
Hi Stuart, I am trying to use your example code 23 tracker and 24 receiver for SX126X. The transmitter seems to be working fine but not the receiver. Despite the settings.h frequency being set to 4340…
-
Hi, I am using your pcb and the same components, how to tune the antenna to 134khz?
-
### Description of the feature you're suggesting.
We recently got new cards to access the trash room in our building. It's a generic white card with no text on it. Flipper identifies the reader as 12…
-
### Description of the feature you're suggesting.
Hi! I saw that development for FSK support for the 125kHz RFID [looked like it begun](https://github.com/flipperdevices/flipperzero-firmware/blob/dev…
-
Hi, I'm facing a curious problem when using the FHSS example with an RFM95W radio, in the following radio configurations: radio.begin(channels[0], 62.5, 11, 7, 0x34, 20, 12, 6);
I'm sending 20 bytes …
-
### Describe the bug.
When I try to emulate a RAW RFID file, I get the following error: `Reading RAW RFID File error`.
I'm using `unlshd-046`.
### Reproduction
1. Switch on
2. Go to 125kHz RFID
…
Fumaz updated
8 months ago
-
Openwrt is good platform for integration.
-
### Description of the feature you're suggesting.
I have a key fob for opening a sliding door, that can't be read by flipper [Sliding_Door.zip](https://github.com/flipperdevices/flipperzero-firmware/…
hnesk updated
10 months ago