-
有没有考虑过把pn532加进去呢?
-
I modified the project to add way to control my X10 and also 315MHZ devices like power socket, home monitoring by arduino.
I found it is better to have one device-connection to communicate with clien…
-
I've captured some AM ASK/OOK signals with an SDR and Audacity. What do I need to do to get these to play back on the same frequency as AM?
I'm trying this and I see a signal in SDR# but it's not s…
-
I am running a system with a EmonTx/RFM12B as the transmitter and a Raspberry Pi/RFM69 as a receiver. That works just fine.
I have replaced the receiver with a RTL-SDR dongle. I have done a few tests…
-
I'm using version 0.8 and RFM69HW
[https://www.ebay.co.uk/itm/RFM69HW-868Mhz-433Mhz-915Mhz-20dBm-HopeRF-Wireless-Transceiver-For-Remote-HM-C/272412839767?ssPageName=STRK%3AMEBIDX%3AIT&var=57138342142…
-
**IMPORTANT NOTICE**
If you do not complete the template below it is likely that your issue will not be addressed. When providing information about your issue please be as extensive as possible so th…
-
I understand that my Sonoff RF Bridge with Tasmota 5.14.0 is not able to decode RF Codes other than 24bit length? I got a very old set of RF power plugs (Company REV) which works fine. I got just now …
-
New android (N+) has an option specifically for this. It's called the "sustained performance mode". It is designed to allow apps to opt into a mode that *disables* any unsustainable boost clocks. This…
-
1.《智能汽车安全攻防大揭秘》[https://www.amazon.cn/dp/B075QZXY7W](https://www.amazon.cn/dp/B075QZXY7W)
2. [Inside Radio: An Attack and Defense Guide](https://unicorn.360.com/blog/2018/01/29/Inside_Radio_An_At…
-
Hi,
Firstly thank you for your great efforts.
Secondly, does your code support the RF features of the RM Pro devices?