-
```
What steps will reproduce the problem?
1. Unpack\install arduino-1.0.1-windows.zip
2. copy Timer1 library to \arduino-1.0.1\libraries
3. Start Arduino IDE, load ISRBlink example sketch and verify…
-
Hi,
When I try to compile for an attiny44 8Mhz internal, it returns
"recipe.preproc.macros pattern is missing
Error compiling for board ATtiny."
Arduino IDE 1.6.9, Arduino Nano as ISP
Could you he…
-
```
Interface supplémentaire
```
Original issue reported on code.google.com by `patrice....@gmail.com` on 16 Dec 2013 at 3:17
-
https://publiclab.org/notes/rmeister/07-18-2016/webjack-testers-needed#c15006
looking for ATTiny softmodem, i find:
https://github.com/l1q1d/SoftModem-for-attiny85
http://fab.cba.mit.edu/classes/86…
-
```
What steps will reproduce the problem?
1. Unpack\install arduino-1.0.1-windows.zip
2. copy Timer1 library to \arduino-1.0.1\libraries
3. Start Arduino IDE, load ISRBlink example sketch and verify…
-
```
What steps will reproduce the problem?
1. Unpack\install arduino-1.0.1-windows.zip
2. copy Timer1 library to \arduino-1.0.1\libraries
3. Start Arduino IDE, load ISRBlink example sketch and verify…
-
The cores are not recognized with the Arduino IDE 1.8.x
Even though the board manager says they are installed. The error is the following:
```
Error compiling for board ATtiny25/45/85.
The curre…
-
Ist there a code for the attiny made already?
-
The ATTiny85 code fails to read input from a 433Mhz RF receiver when working at 1MHz. The following example compiles perfectly and runs OK wihen the ATTiny85 is working at 8MHz. However, it compiles b…
-
```
What steps will reproduce the problem?
1. Unpack\install arduino-1.0.1-windows.zip
2. copy Timer1 library to \arduino-1.0.1\libraries
3. Start Arduino IDE, load ISRBlink example sketch and verify…