-
### Describe the bug
Wifi will not authenticate via a VLAN using any type of encryption. An Open network with no password is fine.
Alternatively, removing the VLAN and assigning the WiFi directly …
-
### Describe the bug
Wireless network statistics and status are not working, neither in LuCI nor in terminal tools. No matter the operating mode, client or access point, there is no activity inform…
-
Current PowerSpectra.freq_range adds easier access than ind_low/ind_high to limit calculated frequencies, but still is not very user-friendly if user
- wants to calculate only one discrete frequency b…
-
The current output of the ATA are files in filterbank`.fil` format.
Is there scope for adding support for filterbank files input to `hyperseti`?
-
### Describe the bug
In master snapshot images (for different device platforms, e.g. ipq40xx, ipq806x etc.), a STA/client can never get any IP address from the uplink if an AP is configured and en…
-
Some methods work without a predefined grid. Instead the (likely or possible) position of sources is given as a result of the method together with the strength of the sources. Our standard implementat…
-
*DoritosVodka:*
Model : TP-Link EAP245 v3
Architecture : Qualcomm Atheros QCA956X ver 1 rev 0
Firmware Version : OpenWrt SNAPSHOT r14740-0b31713c85 / LuCI Master git-20.295.56858-2bbde85
Kernel Ve…
-
Currently, not all Beamformers included in Acoular have their own test.
Missing tests for:
* BeamformerTimeTraj
* BeamformerTimeSqTraj
* BeamformerCleant
* BeamformerCleant
* ...
Related to #139
-
Presently there are time domain beamformer variants that yield either the time signal or the squared time signal (possibly with auto power removal). Most of the code in the result function is the same…
-
Currently we support I, Q, U, V and IQUV. There are requests to be able to produce subsets of the stokes parameters, e.g. I,V and Q,U.
Rather than handling these all individually it would make sen…